Temperature measurements, isotopic contents, and dissolved constituents are presented for springs at Mount Shasta to understand slightly thermal springs in the Shasta Valley based on the characteristics of non-thermal springs. Non-thermal springs on Mount Shasta are generally cooler than mean annual air temperatures for their elevation. The specific conductance of non-thermal springs increases linearly with discharge temperature. Springs at higher and intermediate elevations on Mount Shasta have fairly limited circulation paths, whereas low-elevation springs have longer paths because of their higher-elevation recharge. Springs in the Shasta Valley are warmer than air temperatures for their elevation and contain significant amounts of chloride and sulfate, constituents often associated with volcanic hydrothermal systems. Data for the Shasta Valley springs generally define mixing trends for dissolved constituents and temperature. The isotopic composition of the Shasta Valley springs indicates that water fell as precipitation at a higher elevation than any of the non-thermal springs. It is possible that the Shasta Valley springs include a component of the outflow from a proposed 210??C hydrothermal system that boils to supply steam for the summit acid-sulfate spring. In order to categorize springs such as those in the Shasta Valley, we introduce the term slightly thermal springs for springs that do not meet the numerical criterion of 10??C above air temperature for thermal springs but have temperatures greater than non-thermal springs in the area and usually also have dissolved constituents normally found in thermal waters. ?? 2002 Elsevier Science B.V. All rights reserved.
Additional Publication Details
Slightly thermal springs and non-thermal springs at Mount Shasta, California: Chemistry and recharge elevations