thumbnail

Estimating selenium removal by sedimentation from the Great Salt Lake, Utah

Applied Geochemistry

By:
, , , ,
DOI: 10.1016/j.apgeochem.2009.02.023

Links

Abstract

The mass of Se deposited annually to sediment in the Great Salt Lake (GSL) was estimated to determine the significance of sedimentation as a permanent Se removal mechanism. Lake sediment cores were used to qualitatively delineate sedimentation regions (very high to very low), estimate mass accumulation rates (MARs) and determine sediment Se concentrations. Sedimentation regions were defined by comparison of isopach contours of Holocene sediment thicknesses to linear sedimentation rates determined via analysis of 210Pb, 226Ra, 7Be and 137Cs activity in 20 short cores (<5 cm), yielding quantifiable results in 13 cores. MARs were developed via analysis of the same radioisotopes in eight long cores (>10 cm). These MARs in the upper 1-2 cm of each long core ranged from 0.019 to 0.105 gsed/cm2/a. Surface sediment Se concentrations in the upper 1 or 2 cm of each long core ranged from 0.79 to 2.47 mg/kg. Representative MARs and Se concentrations were used to develop mean annual Se removal by sedimentation in the corresponding sedimentation region. The spatially integrated Se sedimentation rate was estimated to be 624 kg/a within a range of uncertainty between 285 and 960 kg/a. Comparison to annual Se loading and other potential removal processes suggests burial by sedimentation is not the primary removal process for Se from the GSL. ?? 2009 Elsevier Ltd.

Additional Publication Details

Publication type:
Article
Publication Subtype:
Journal Article
Title:
Estimating selenium removal by sedimentation from the Great Salt Lake, Utah
Series title:
Applied Geochemistry
DOI:
10.1016/j.apgeochem.2009.02.023
Volume
24
Issue:
5
Year Published:
2009
Language:
English
Larger Work Type:
Article
Larger Work Subtype:
Journal Article
First page:
936
Last page:
949
Number of Pages:
14