Digital data sets that describe aquifer characteristics of the High Plains Aquifer in western Oklahoma

Open-File Report 96-451

, , and



ARC/INFO export files This diskette contains digitized aquifer boundaries and maps of hydraulic conductivity, recharge, and ground-water level elevation contours for the High Plains aquifer in western Oklahoma. This area encompasses the panhandle counties of Cimarron, Texas, and Beaver, and the western counties of Harper, Ellis, Woodward, Dewey, and Roger Mills. The High Plains aquifer underlies approximately 7,000 square miles of Oklahoma and is used extensively for irrigation. The High Plains aquifer is a water-table aquifer and consists predominately of the Tertiary-age Ogallala Formation and overlying Quaternary-age alluvial and terrace deposits. In some areas the aquifer is absent and the underlying Triassic, Jurassic, or Cretaceous-age rocks are exposed at the surface. These rocks are hydraulically connected with the aquifer in some areas. The High Plains aquifer is composed of interbedded sand, siltstone, clay, gravel, thin limestones, and caliche. The proportion of various lithological materials changes rapidly from place to place, but poorly sorted sand and gravel predominate. The rocks are poorly to moderately well cemented by calcium carbonate. The aquifer boundaries, hydraulic conductivity, and recharge data sets were created by extracting geologic contact lines from published digital surficial geology maps based on a scale of 1:125,000 for the panhandle counties and 1:250,000 for the western counties. The water-level elevation contours and some boundary lines were digitized from maps in a published water-level elevation map for 1980 based on a scale of 1:250,000. The hydraulic conductivity and recharge values in this report were used as input to the ground-water flow model on the High Plains aquifer. Ground-water flow models are numerical representations that simplify and aggregate natural systems. Models are not unique; different combinations of aquifer characteristics may produce similar results. Therefore, values of hydraulic conductivity and recharge used in the model and presented in this data set are not precise, but are within a reasonable range when compared to independently collected data.

Additional publication details

Publication type:
Publication Subtype:
USGS Numbered Series
Digital data sets that describe aquifer characteristics of the High Plains Aquifer in western Oklahoma
Series title:
Open-File Report
Series number:
Year Published:
U.S. Geological Survey, Water Resources Division ; Available from the Earth Science Information Center, Open-file Reports Section,
2 computer disks :col. ;3 1/2 in.