Bathymetry and capacity of Shawnee Reservoir, Oklahoma, 2016

Scientific Investigations Map 3374
Prepared in cooperation with the City of Shawnee
By: , and 

Links

Abstract

Shawnee Reservoir (locally known as Shawnee Twin Lakes) is a man-made reservoir on South Deer Creek with a drainage area of 32.7 square miles in Pottawatomie County, Oklahoma. The reservoir consists of two lakes connected by an equilibrium channel. The southern lake (Shawnee City Lake Number 1) was impounded in 1935, and the northern lake (Shawnee City Lake Number 2) was impounded in 1960. Shawnee Reservoir serves as a municipal water supply, and water is transferred about 9 miles by gravity to a water treatment plant in Shawnee, Oklahoma. Secondary uses of the reservoir are for recreation, fish and wildlife habitat, and flood control. Shawnee Reservoir has a normal-pool elevation of 1,069.0 feet (ft) above North American Vertical Datum of 1988 (NAVD 88). The auxiliary spillway, which defines the flood-pool elevation, is at an elevation of 1,075.0 ft.

The U.S. Geological Survey (USGS), in cooperation with the City of Shawnee, has operated a real-time stage (water-surface elevation) gage (USGS station 07241600) at Shawnee Reservoir since 2006. For the period of record ending in 2016, this gage recorded a maximum stage of 1,078.1 ft on May 24, 2015, and a minimum stage of 1,059.1 ft on April 10–11, 2007. This gage did not report reservoir storage prior to this report (2016) because a sufficiently detailed and thoroughly documented bathymetric (reservoir-bottom elevation) survey and corresponding stage-storage relation had not been published. A 2011 bathymetric survey with contours delineated at 5-foot intervals was published in Oklahoma Water Resources Board (2016), but that publication did not include a stage-storage relation table. The USGS, in cooperation with the City of Shawnee, performed a bathymetric survey of Shawnee Reservoir in 2016 and released the bathymetric-survey data in 2017. The purposes of the bathymetric survey were to (1) develop a detailed bathymetric map of the reservoir and (2) determine the relations between stage and reservoir storage capacity and between stage and reservoir surface area. The bathymetric map may serve as a baseline to which temporal changes in storage capacity, due to sedimentation and other factors, can be compared. The stage-storage relation may be used in the reporting of real-time Shawnee Reservoir storage capacity at USGS station 07241600 to support water-resource management decisions by the City of Shawnee.

Suggested Citation

Ashworth, C.E., Smith, S.J., and Smith, K.A., 2017, Bathymetry and capacity of Shawnee Reservoir, Oklahoma, 2016: U.S. Geological Survey Scientific Investigations Map 3374, 1 sheet, https://doi.org/10.3133/sim3374.

ISSN: 2329-132X (online)

ISSN: 2329-1311 (print)

Study Area

Table of Contents

  • Acknowledgments
  • Introduction
  • Methods
  • Quality Assurance
  • Results
  • Summary
  • References
Publication type Report
Publication Subtype USGS Numbered Series
Title Bathymetry and capacity of Shawnee Reservoir, Oklahoma, 2016
Series title Scientific Investigations Map
Series number 3374
DOI 10.3133/sim3374
Year Published 2017
Language English
Publisher U.S. Geological Survey
Publisher location Reston, VA
Contributing office(s) Oklahoma Water Science Center
Description Sheet: 42.0 x 36.0 inches; Data Release
Country United States
State Oklahoma
Other Geospatial Shawnee reservoir
Online Only (Y/N) N
Additional Online Files (Y/N) Y
Google Analytic Metrics Metrics page
Additional publication details