Reconnaissance of arsenic concentrations in ground water from bedrock and unconsolidated aquifers in eight northern-tier counties of Pennsylvania

Open-File Report 2006-1376
In cooperation with the Pennsylvania Department of Health and the Pennsylvania Department of Environmental Protection
By:  and 

Links

Abstract

Samples of ground water for analysis of total-arsenic concentrations were collected in eight counties--Potter, Tioga, Bradford, Susquehanna, Wayne, Pike, Sullivan, and Wyoming--and from eight bedrock formations (bedrock aquifers) and overlying glacial aquifers in the north-central and northeastern parts of Pennsylvania in July 2005 and from March through June 2006. The samples were collected from a total of 143 domestic wells, 2 stock wells, 4 non-community wells, 2 community water-system wells, and 3 domestic springs by well or spring owners using sampling kits provided by the U.S. Geological Survey (USGS). An additional 15 domestic wells were sampled by the USGS for analysis of total arsenic. These 15 samples were collected using the same methods and sampling kits provided to the homeowners.

Samples were analyzed for total arsenic by the Pennsylvania Department of Environmental Protection Laboratory using a minimum reporting level of 4.0 µg/L (micrograms per liter). Arsenic was detected in water from 18 domestic wells in four counties--Bradford (3 wells), Sullivan (1 well), Tioga (13 wells), and Wayne (1 well). The median concentration of total arsenic was less than 4.0 µg/L, and the maximum concentration was 188 µg/L. Water from 10 wells had concentrations of total arsenic greater than the U.S. Environmental Protection Agency Maximum Contaminant Level of 10 µg/L.

Detectable concentrations of total arsenic were measured in water from wells that ranged in depth from 29 to 400 feet, and that were completed in three aquifers--Lock Haven Formation, Catskill Formation, and unconsolidated glacial sediments; no springs had detectable concentrations of total arsenic. Water samples representing the Lock Haven Formation were collected from 60 wells; water from 12 of these wells had detectable concentrations of total arsenic. Water samples representing the Catskill Formation were collected from 57 wells; water from 4 wells had detectable concentrations of total arsenic. Water samples representing the unconsolidated glacial sediments were collected from 17 wells; 2 wells had water with detectable concentrations of total arsenic.

Contingency tables tested for significant differences in total arsenic between aquifers, topographic settings, and well depths. Concentrations of total arsenic were significantly greater (95-percent confidence level) in the Lock Haven Formation than in the other bedrock units. Concentrations of total arsenic also varied significantly by topographic setting. Wells completed in the Lock Haven Formation and located in valleys had significantly greater concentrations of total arsenic than similar wells located on hilltops or slopes. Concentrations of total arsenic did not vary significantly by topographic setting in the Catskill Formation. Concentrations of total arsenic did not vary significantly by well depth for any aquifer.

Iron staining, hydrogen-sulfide odor, or both were common complaints of well owners. Iron staining was a complaint of 44 well owners. Hydrogen-sulfide odor was a complaint of 35 well owners. Fourteen well owners complained of both iron staining and hydrogen sulfide. No correlation to the presence of arsenic in the wells sampled was found with iron staining, hydrogen-sulfide odor, or both.

Water from 8 of the 10 wells that contained concentrations of total arsenic greater than 10 µg/L were sampled by USGS personnel for the determination of concentrations of dissolved arsenic (minimum reporting level 0.3 µg/L) and arsenic species {arsenite [As (III)], arsenate [As (V)], monomethylarsonate (MMA), and dimethylarsinate (DMA)} at the USGS National Water Quality Laboratory. Analytical results from these samples showed a median concentration of 38.7 µg/L dissolved arsenic in water and a maximum of 178 µg/L. As (III) was the most common arsenic species present in the water for seven of the eight wells and was found in water characteristic of reducing environments [pH 8.2 to 9.1, dissolved oxygen 0.06 to 0.29 milligrams per liter (mg/L), and oxidation reduction potential -63 to -203 millivolts (mv)]. As (V) was the dominant arsenic species in water characteristic of an oxidizing environment (pH 4.8, dissolved oxygen 2.15 mg/L, oxidation reduction potential 265 mv). The arsenic species MMA and DMA were detected in the water from two wells. The arsenic species MMA was detected at an estimated concentration of 0.9 µg/L in water from one well; the concentration was less than 1.2 µg/L in water from seven wells. The arsenic species DMA was detected at concentrations of 1.0 and 1.5 µg/L in water from two wells; the concentration was less than 0.6 µg/L in water from six wells. Both wells that contained detectable concentrations of MMA and DMA produced water that was characteristic of reducing environments.

Study Area

Publication type Report
Publication Subtype USGS Numbered Series
Title Reconnaissance of arsenic concentrations in ground water from bedrock and unconsolidated aquifers in eight northern-tier counties of Pennsylvania
Series title Open-File Report
Series number 2006-1376
DOI 10.3133/ofr20061376
Year Published 2007
Language English
Publisher U.S. Geological Survey
Publisher location Reston, VA
Contributing office(s) Pennsylvania Water Science Center
Description iv, 35 p.
Time Range Start 2005-07-01
Time Range End 2006-06-30
Country United States
State Pennsylvania
County Bradford County, Pike County, Potter County, Sullivan County, Susquehanna County, Tioga County, Wayne County, Wyoming County
Online Only (Y/N) Y
Google Analytic Metrics Metrics page
Additional publication details