Results of Laboratory Tests on Surficial Sediments from the Upper Continental Slope Northern Gulf of Mexico

Open-File Report 79-579
By:

Links

Abstract

The purpose of this report is to present the results of geo­technical, textural, and chemical tests performed on samples from the upper Continental Slope, northern Gulf of Mexico.

The samples were collected by a piston corer up to 12 m (40 ft.} in length with a head weight of 908 kg (one ton}. The inside diameter of the C. A. B. liner was 89 mm (3.5 inches}. Upon retrieval, the cores were cut in 1.5 m sections, examined for evidence of disturbance, then, if in acceptable condition, were sealed and placed in their in situ vertical position in a refrigerated van. Once ashore, the sections were opened, sealed with wax, recapped and stored as before.

The cores were split lengthwise for analysis. One half of the core was X-rayed and the radiograph was carefully examined as a further check for disturbance. This half was then archived. The other half of the core was used for the laboratory work.

Suggested Citation

Booth, J.S., 1979, Results of laboratory tests on surficial sediments from the upper continental slope northern Gulf of Mexico: U.S. Geological Survey Open-File Report 1979-579, 7 p., https://pubs.er.usgs.gov/publication/ofr79579.

ISSN: 2331-1258 (online)

Table of Contents

  • Foreword
  • Introduction
  • Laboratory Tests
  • Data Summary
  • Data Listing
Publication type Report
Publication Subtype USGS Numbered Series
Title Results of Laboratory Tests on Surficial Sediments from the Upper Continental Slope Northern Gulf of Mexico
Series title Open-File Report
Series number 79-579
DOI 10.3133/ofr79579
Edition -
Year Published 1979
Language ENGLISH
Publisher U.S Geological Survey
Publisher location Woods Hole. MA
Description i-111, 7 p. :map ;28 cm.
Google Analytic Metrics Metrics page
Additional publication details