ARC/INFO export and nonproprietary format files This diskette contains digitized aquifer boundaries and maps of hydraulic conductivity, recharge, and ground-water level elevation contours for the Tillman terrace and alluvial aquifer in southwestern Oklahoma. The Tillman terrace aquifer encompasses the unconsolidated terrace deposits and alluvium associated with the North Fork of the Red River and the Red River in the western half of Tillman County. These sediments consist of discontinuous layers of clay, sandy clay, sand, and gravel. The aquifer extends over an area of 285 square miles and is used for irrigation and domestic purposes. Granite and the Hennessey Formation outcrop in northern parts of the aquifer where alluvial deposits are absent. These outcrops were included as part of the aquifer in a thesis that modeled the ground-water flow in the aquifer. Most of the aquifer boundaries and some of the lines in the hydraulic conductivity and recharge data sets were extracted from a published digital surficial geology data set based on a scale of 1:250,000. Most of the lines in the hydraulic conductivity, recharge, and 1969 water-level elevation contour data sets, and one line in the aquifer boundary data set were digitized from a paper map published at a scale of 1:249,695 in a thesis in which the ground-water flow in the aquifer was modeled. Ground-water flow models are numerical representations that simplify and aggregate natural systems. Models are not unique; different combinations of aquifer characteristics may produce similar results. Therefore, values of hydraulic conductivity and recharge used in the model and presented in this data set are not precise, but are within a reasonable range when compared to independently collected data.