Flood-inundation maps for the Patoka River in and near Jasper, southwestern Indiana
Links
- Document: Report (34.2 MB pdf)
- Data Release: USGS data release - Geospatial Datasets and Surface-Water Hydraulic Model for the Patoka River in and near Jasper, Southwest Indiana, Flood-inundation Study
- Download citation as: RIS | Dublin Core
Abstract
Digital flood-inundation maps for a 9.5-mile reach of the Patoka River in and near the city of Jasper, southwestern Indiana (Ind.), from the streamgage near County Road North 175 East, downstream to State Road 162, were created by the U.S. Geological Survey (USGS) in cooperation with the Indiana Department of Transportation. The flood-inundation maps, which can be accessed through the USGS Flood Inundation Mapping Science web site at https://water.usgs.gov/osw/flood_inundation/, depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at the USGS streamgage Patoka River at Jasper, Ind. (station number 03375500). The Patoka streamgage is located at the upstream end of the 9.5-mile river reach. Near-real-time stages at this streamgage may be obtained from the USGS National Water Information System at https://waterdata.usgs.gov/ or the National Weather Service Advanced Hydrologic Prediction Service at http://water.weather.gov/ahps/, although flood forecasts and stages for action and minor, moderate, and major flood stages are not currently (2017) available at this site (JPRI3).
Flood profiles were computed for the stream reach by means of a one-dimensional step-backwater model. The hydraulic model was calibrated by using the most current stage-discharge relation at the Patoka River at Jasper, Ind., streamgage and the documented high-water marks from the flood of April 30, 2017. The calibrated hydraulic model was then used to compute five water-surface profiles for flood stages referenced to the streamgage datum ranging from 15 feet (ft), or near bankfull, to 19 ft. The simulated water-surface profiles were then combined with a geographic information system digital elevation model (derived from light detection and ranging [lidar] data having a 0.98 ft vertical accuracy and 4.9 ft horizontal resolution) to delineate the area flooded at each water level.
The availability of these flood-inundation maps, along with real-time stage from the USGS streamgage at the Patoka River at Jasper, Ind., will provide emergency management personnel and residents with information that is critical for flood response activities such as evacuations and road closures as well as for postflood recovery efforts.
Suggested Citation
Fowler, K.K., 2018, Flood-inundation maps for the Patoka River in and near Jasper, southwestern Indiana: U.S. Geological Survey Scientific Investigations Report 2017–5138, 11 p., https://doi.org/10.3133/sir20175138.
ISSN: 2328-0328 (online)
Study Area
Table of Contents
- Abstract
- Introduction
- Creation of Flood-Inundation Map Library
- Summary
- References Cited
| Publication type | Report |
|---|---|
| Publication Subtype | USGS Numbered Series |
| Title | Flood-inundation maps for the Patoka River in and near Jasper, southwestern Indiana |
| Series title | Scientific Investigations Report |
| Series number | 2017-5138 |
| DOI | 10.3133/sir20175138 |
| Year Published | 2018 |
| Language | English |
| Publisher | U.S. Geological Survey |
| Publisher location | Reston, VA |
| Contributing office(s) | Indiana-Kentucky Water Science Center |
| Description | Report: vii, 11 p.; Data Release |
| Country | United States |
| State | Indiana |
| City | Jasper |
| Other Geospatial | Patoka River |
| Online Only (Y/N) | Y |
| Additional Online Files (Y/N) | N |
| Google Analytic Metrics | Metrics page |