Quality of Pesticide Data for Groundwater Analyzed for the National Water-Quality Assessment Project, 2013–18

Scientific Investigations Report 2020-5072
National Water-Quality Assessment Project
By: , and 

Links

  • Document: Report (3.57 MB pdf)
  • Tables:
    • Table 1 (55.2 kB xlsx) — Information about pesticide compounds included on the National Water Quality Laboratory schedule 2437, with human-health benchmarks and ranges of detection and laboratory reporting limits
    • Table 1 (39.1 kB csv) — Information about pesticide compounds included on the National Water Quality Laboratory schedule 2437, with human-health benchmarks and ranges of detection and laboratory reporting limits
    • Table 3 (53.9 kB xlsx) — Summary of detections of schedule 2437 pesticide compounds in groundwater, field blanks, and laboratory blanks, May 2013 through September 2018
    • Table 3 (23.3 kB csv) — Summary of detections of schedule 2437 pesticide compounds in groundwater, field blanks, and laboratory blanks, May 2013 through September 2018
    • Table 4 (91.2 kB xlsx) — Comparison of the 90-percent upper confidence limit for the 90th, 95th, and 99th percentiles of schedule 2437 pesticide compounds in laboratory blanks by water year, with minimum groundwater concentrations, maximum laboratory limits, and human-health benchmarks
    • Table 4 (54.7 kB csv) — Comparison of the 90-percent upper confidence limit for the 90th, 95th, and 99th percentiles of schedule 2437 pesticide compounds in laboratory blanks by water year, with minimum groundwater concentrations, maximum laboratory limits, and human-health benchmarks
    • Table 5 (47.9 kB xlsx) — Summary of false-positive and false-negative results for schedule 2437 pesticide compounds based on third-party blind spike samples, May 2013 through September 2018
    • Table 5 (19.4 kB csv) — Summary of false-positive and false-negative results for schedule 2437 pesticide compounds based on third-party blind spike samples, May 2013 through September 2018
    • Table 6 (58.7 kB xlsx) — Summary statistics for the recovery of schedule 2437 pesticide compounds in laboratory reagent spikes, May 2013 through September 2018
    • Table 6 (23.4 kB csv) — Summary statistics for the recovery of schedule 2437 pesticide compounds in laboratory reagent spikes, May 2013 through September 2018
    • Table 7 (55.3 kB xlsx) — Summary statistics for the recovery of schedule 2437 pesticide compounds in third-party blind spike samples, May 2013 through September 2018
    • Table 7 (22.4 kB csv) — Summary statistics for the recovery of schedule 2437 pesticide compounds in third-party blind spike samples, May 2013 through September 2018
    • Table 8 (64.7 kB xlsx) — Summary statistics for the recovery of schedule 2437 pesticide compounds in field matrix spikes, May 2013 through September 2018
    • Table 8 (22.8 kB csv) — Summary statistics for the recovery of schedule 2437 pesticide compounds in field matrix spikes, May 2013 through September 2018
    • Table 11 (34.1 kB xlsx) — Summary of results of data-quality assessment for schedule 2437 pesticide compounds based on all quality-control sample types, May 2013 through September 2018
    • Table 11 (18.6 kB csv) — Summary of results of data-quality assessment for schedule 2437 pesticide compounds based on all quality-control sample types, May 2013 through September 2018
  • Data Release: USGS data release — Field, laboratory, and third-party data for assessment of the quality of pesticide results reported by the National Water Quality Laboratory for groundwater samples collected by the National Water-Quality Assessment Project, 2013–18
  • Download citation as: RIS | Dublin Core

Abstract

The National Water-Quality Assessment (NAWQA) Project of the U.S. Geological Survey (USGS) submitted nearly 1,900 samples collected from groundwater sites across the United States in 2013–18 for analysis of 225 pesticide compounds (pesticides and pesticide degradates, hereafter referred to as “pesticides”) by USGS National Water Quality Laboratory schedule 2437 (S2437). For the associated NAWQA study of pesticide occurrence and concentration in groundwater, and for other studies using pesticide results determined by S2437, it is necessary to assess the ability of reported results to meet data-quality requirements that will allow study objectives to be achieved. This assessment of the quality of S2437 results reported in 2013–18 examined data from field and laboratory quality-control samples, along with third-party performance assessment samples, to estimate bias and variability and to identify their potential sources, with an emphasis on implications for the interpretation of pesticide data for groundwater. Results indicate that measurements produced by the S2437 method for most pesticides have bias and variability that would be considered acceptable for many interpretative studies, which could therefore use the results without qualification or censoring. However, the reported data for a subset of pesticides have the potential for unacceptable contamination bias, high or low recovery bias, or high variability as a consequence of method performance and (or) nonlaboratory factors that could preclude their use for certain common objectives or could necessitate adjustment or qualification to meet those objectives.

Based on data for laboratory blanks, censoring of some detections for a subset of pesticides reported by the laboratory in environmental samples might be necessary or desirable to avoid an unacceptably high likelihood of a false-positive result caused by laboratory contamination. The 90-percent upper confidence limit for the 95th percentile of laboratory blank concentration equals or exceeds the minimum reported groundwater concentration in at least 1 water year for 28 pesticides. During at least 1 water year, this upper confidence limit exceeds the maximum laboratory detection limit for 17 pesticides and exceeds the maximum laboratory reporting limit for 3 pesticides (ametryn, atrazine, and diazinon). The level of contamination indicated by this upper confidence limit should not substantially affect the suitability of reported environmental concentrations for any compound for comparison with corresponding human-health benchmarks.

Despite being subjected to the same laboratory processes as laboratory blanks, field blanks indicated little evidence of contamination bias. This observation could largely be the consequence of data-reporting practices, which utilize detections in laboratory blanks to censor results in associated field samples (including blanks and environmental samples) when relative concentrations indicate that a result could have a substantial contribution from laboratory contamination. Laboratory censoring appears likely to reduce the risk of false-positive results in environmental samples below the level that laboratory blank results alone would imply.

Whereas data available for third-party blind blank samples analyzed in 2018 indicate that only propoxur had any false-positive results, data for pesticides that were not spiked into blind spike samples analyzed in 2013–18 indicate that the false-positive rates for 31 pesticides exceeded 1 percent when considering only detections reported at concentrations greater than the maximum detection limit. Although about half of these pesticides lack substantial supporting evidence of contamination bias based on laboratory blank or field blank detections, indicating that spiking issues or degradation of parent compounds within the spiked samples might be a contributing factor to some false-positive results, these results indicate the need to closely examine detections reported for some pesticides in environmental samples analyzed during a similar period for possible contributions from contamination bias. Data for blind spike samples that were spiked at concentrations above the maximum reporting limit indicate that false-negative rates for eight pesticides exceed 10 percent; substantial low bias could affect results reported for these pesticides in environmental samples analyzed during a similar period.

Data for laboratory reagent spikes, which measure recovery of pesticides in blank water, show little evidence for unacceptable recovery bias for S2437 pesticides. However, field matrix spikes, which measure recovery of pesticides in environmental matrices, indicate that degradation and (or) matrix effects could result in moderate to substantial low bias for groundwater results for several pesticides. Low bias could cause some reported concentrations to be categorized as being below a benchmark when the actual concentration in groundwater is greater than the benchmark. Occurrence and concentrations in groundwater could be substantially underrepresented for six pesticides with benchmarks (1H-1,2,4-triazole, asulam, bifenthrin, cis-permethrin, fenbutatin oxide, and naled) that have median recoveries between zero and 50 percent in field matrix spikes. Two compounds (didealkylatrazine and 2-hydroxy-6-ethylamino-4-amino-s-triazine) have median recoveries near or greater than 150 percent in field matrix spikes, indicating a substantial high bias. Plots of data for all spike types show clear changes in the typical recovery with time for some pesticides, which would require further examination for evaluation of temporal trends in environmental concentrations.

Data for laboratory reagent spikes indicate that nearly all S2437 pesticides have acceptable variability resulting from random measurement error. Only two compounds (fenbutatin oxide and naled) have F-pseudosigma values greater than 30 percent for recovery, which implies the potential for relatively high variability in reported concentrations and could affect comparison of concentrations to benchmarks and determination of whether concentrations for samples collected at separate locations or times are truly different with a specified level of confidence. Data for third-party blind spike samples show relatively high variability for a greater number of pesticides, although these results likely reflect the influence of degradation and (or) differences in the magnitude and variability of concentrations used for blind spikes relative to laboratory reagent spikes. Detailed analysis of variability using field replicate data is possible for only 12 pesticides on S2437; low variability in analyte detection and concentration is indicated for most of these pesticides in groundwater.

Suggested Citation

Bexfield, L.M., Belitz, K., Sandstrom, M.W., Beaty, D., Medalie, L., Lindsey, B.D., and Nowell, L.H., 2020, Quality of pesticide data for groundwater analyzed for the National Water-Quality Assessment Project, 2013–18: U.S. Geological Survey Scientific Investigations Report 2020–5072, 35 p., https://doi.org/10.3133/sir20205072.

ISSN: 2328-0328 (online)

Study Area

Table of Contents

  • Abstract
  • Introduction
  • Methods
  • Results of Data-Quality Assessment
  • Implications for Interpretation of Schedule 2437 Pesticide Results for Groundwater
  • Summary
  • Acknowledgments
  • References Cited
Publication type Report
Publication Subtype USGS Numbered Series
Title Quality of pesticide data for groundwater analyzed for the National Water-Quality Assessment Project, 2013–18
Series title Scientific Investigations Report
Series number 2020-5072
DOI 10.3133/sir20205072
Year Published 2020
Language English
Publisher U.S. Geological Survey
Publisher location Reston, VA
Contributing office(s) National Water Quality Laboratory, WMA - Earth System Processes Division
Description Report: vi, 35 p.; 11 Tables; Data Release
Country United States
Online Only (Y/N) Y
Additional Online Files (Y/N) Y
Google Analytic Metrics Metrics page
Additional publication details