As part of the expedition GANOVEX VI 1990/91, the Bundesanstalt für Geowissenschaften und Rohstoffe (BGR), the Alfred Wegener Institute for Polar and Marine Research (AWI), and the United States Geological Survey (USGS) carried out an airborne magnetic survey over the northwestern Ross Ice Shelf and McMurdo Sound between Ross Island, the Transantarctic Mountains, and Minna Bluff.

The area planned for the aeromagnetic survey connects directly with the GANOVEX IV survey area (BGR & USGS 1987, BACHEM et al. 1989a) which terminated along an approximately cast-west line at about the latitude of Cape Bird. The GANOVEX IV survey covered the Victoria Land Basin - which is the westernmost of the three north/south striking basins in the Ross Sea - from its northern end in the Terra Nova Bay region to its known southern end at Ross Island. A possible southem extension of the Victoria Land Basin and its central graben structure (the Terror Rift as found from seismic surveys (COOPER et al. 1987) and what has been referred to as Victoria Graben in the aeromagnetic interpretation of the GANOVEX IV data (BOSUM et al. 1989) was one of the major targets for this survey.

The survey was laid out in the form of blocks. A 135 km wide transect from the Transantarctic Mountains to about 175° W formed the focal block of the survey (Fig. 1) in which all major scientific objectives could be covered. Other survey blocks were planned to the south of this. During the course of the survey it turned out that in the time available no further area could be covered. Indeed, the unfavourable weather conditions made it impossible to complete even the above described main section fully.

In detail, the lay-out of the survey area was closely following that of the GANOVEX IV survey to assure compatibility and direct continuation between the two data sets.

The line spacing was chosen again to 4.4 km with a tic-line separation of 22 km. The survey altitude of 2,000 ft (610 m) corresponds to that of the Ross Sea section of the GANOVEX IV survey to which this survey area is directly adjacent. The profile lines were aligned approximately E-W, the tie-lines N-S.

As part of the survey area is covered by the maps of the USGS Antarctica Reconnaissance Series 1:250,000 the Lambert conformal conic projection used for these maps was also used for the preparation of a flight line grid.