The USGS National Seismic Hazard Maps are updated about every six years by incorporating newly vetted science on earthquakes and ground motions. The 2008 hazard maps for the central and eastern United States region (CEUS) were updated by using revised New Madrid and Charleston source models, an updated seismicity catalog and an estimate of magnitude uncertainties, a distribution of maximum magnitudes, and several new ground-motion prediction equations. The new models resulted in significant ground-motion changes at 5 Hz and 1 Hz spectral acceleration with 5% damping compared to the 2002 version of the hazard maps. The 2008 maps have now been incorporated into the 2009 NEHRP Recommended Provisions, the 2010 ASCE-7 Standard, and the 2012 International Building Code. The USGS is now planning the next update of the seismic hazard maps, which will be provided to the code committees in December 2013. Science issues that will be considered for introduction into the CEUS maps include: 1) updated recurrence models for New Madrid sources, including new geodetic models and magnitude estimates; 2) new earthquake sources and techniques considered in the 2010 model developed by the nuclear industry; 3) new NGA-East ground-motion models (currently under development); and 4) updated earthquake catalogs. We will hold a regional workshop in late 2011 or early 2012 to discuss these and other issues that will affect the seismic hazard evaluation in the CEUS.