Maps showing mineral resource assessment for vein and replacement deposits of base and precious metals, barite, and fluorspar, Dillon 1 degree by 2 degrees Quadrangle, Idaho and Montana
- R.C. Pearson , C.M. Trautwein , B.R. Berger , W.F. Hanna , S.K. Jenson , J.S. Loen , S.H. Moll , T.L. Purdy , L.C. Rowan , E.T. Ruppel , and D.B. Segal
This report is one of several that assess the mineral resources in the Dillon quadrangle. For the purpose of the assessment, the deposits that are known in the quadrangle, or suspected to be present from a knowledge of the geologic setting, have been grouped into 30 deposit types on the basis of the mineralogy or commodity in the ore and the structural or depositional setting of the deposit. The emphasis in these assessment reports is on metallic minerals, but some important nonmetallic minerals are also considered. Fossil fuels are beyond the scope of this investigation, phosphate and uranium have been investigated previously (Swanson, 1970; Wodzicki and Krason, 1981 ), and certain nonmetallic minerals, including bulk commodities such as sand and gravel, are in large supply and thus are not considered.
The mineral resource assessment discussed in this report concentrates on a single deposit type (of the total of 30 types) that we call "vein and replacement deposits of base and precious metals." Base and precious metals produced from such deposits are copper, lead, zinc, gold, and silver. Vein deposits of barite and fluorspar are also discussed, but because they seem to be of minor importance, they are treated briefly. Vein and replacement deposits of base and precious metals are classified as a single deposit type rather than as numerous possible subordinate types that might be distinguished on the basis of mineralogy, metal content, or other factors, because the characteristics of the ore, the ore bodies, and the structural setting are not sufficiently well known to yield a consistent detailed classification for the entire quadrangle. Furthermore, the criteria used here to explain the localization of deposits are too general to allow discrimination among subordinate types at a scale of 1 :250,000 or smaller.
In assessing mineral resources, we have adopted a general philosophy similar to that of Harrison and others ( 1986). We attempt to identify parts of the quadrangle that are favorable for the occurrence of mineral resources, and we make an assignment of the relative resource potential of all parts of the quadrangle. We do not attempt to locate specific exploration targets nor to determine the quantity of reserves or resources present.
Additional publication details
- Publication type:
- Publication Subtype:
- USGS Numbered Series
- Maps showing mineral resource assessment for vein and replacement deposits of base and precious metals, barite, and fluorspar, Dillon 1 degree by 2 degrees Quadrangle, Idaho and Montana
- Series title:
- Series number:
- Year Published:
- U.S. Geological Survey
- Contributing office(s):
- Earth Resources Observation and Science (EROS) Center
- 10 maps on 2 sheets :9 col. ;sheets 92 x 142 cm. and 109 x 82 cm., folded in envelope 30 x 24 cm. +1 pamphlet (31 p. : ill. ; 28 cm.)